-
ASTM B150 Aluminium Bronze Alloy CA 104 Sheet
AB2 Aluminium Bronze Sheets
-
UNS C95800 Plate
Aluminium Bronze CA 104 Plates
-
CuAl10Ni Sheets
WNR. CuAl10Ni Sheets
CA 104 Aluminium Bronze Alloy Sheet, Aluminium Bronze AB2 Plates, C61400 Aluminum Bronze Plate, AB2 Plate Suppliers in Mumbai.
Aluminium Bronze AB2 Plates are a type of corrosion-resistant alloy with excellent strength, hardness and fatigue resistance. They are primarily used in marine and industrial applications due to their superior strength and durability. They also offer good electrical conductivity and corrosion resistance even in the most aggressive environments. The combination of copper and aluminium provides superior wear resistance and high load capacity, while still having low maintenance costs compared to other alloys. The surface finish is highly polished, which gives it an attractive appearance as well as improves its service life. It has been known for its ability to resist seawater corrosion for over 100 years, making it a popular choice for naval vessels built before the introduction of stainless steel.
Table of Content
Thanks to their superior physical and chemical properties, Aluminium Bronze AB2 plates are used in various applications such as shipbuilding, offshore oil platforms, bridges, power plants and marine engineering. They can also be found in ship propellers and other underwater components that require strength and protection from corrosion. In addition to its mechanical properties, these plates are highly resistant to galvanic corrosion due to their low coefficient of thermal expansion.
Aluminum Bronze Plates C61400, AB2 Aluminium Bronze Plate, Aluminium Bronze Alloy CA 104 Sheets, UNS C95800 Sheet, AB2 Plate Suppliers, C61400 Aluminum Bronze Plate, AB2 Sheet, Aluminium Bronze AB2 Plates, CA 104 Aluminum Bronze Sheet, Aluminium Bronze CA 104 Plate, AB2 Aluminium Bronze Sheet Manufacturers In India.
Overall, Aluminium Bronze CA 104 plates provide an economical solution for a variety of demanding industrial applications and environments. With its excellent strength-to-weight ratio and resistance to wear, it is the perfect choice for applications requiring durability and performance at an affordable cost. When you need reliable performance in the harshest conditions, Aluminium Bronze AB2 plates are a great choice.
Get Aluminium Bronze CA 104 Plate Suppliers in Mumbai at Factory Price, Wide range of AB2 Thin Aluminium Bronze Alloy Sheets as per JIS, AISI, ASTM, GB standard, Aluminium Bronze Sheet AB2 Stock, Bulk Stockholders Of 2mm AB2 Aluminium Bronze Alloy Sheet In India.
AB2 Aluminium Bronze Sheets Specifications
| Specifications | ASTM B150 / ASME SB150, BS EN 10088-2, en 10028-7, IS 6911 |
| Dimensions | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Size Range |
Cold Rolled : 0.5-6.4 mm Hot Rolled : 3.0–10.0 mm |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| International Standard of Sheets |
ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) |
EN 10258/ DIN 59381 EN 10151 EN 10088 |
| Finish | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, mirror etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, soft annealed, descaled, sheared, annealed |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Profiling |
Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Aluminium Bronze AB2 Sheets Equivalent Material
| UNS | SAE | AS 1565 | BS1400 | DIN | AS | BS | ASTM | USA |
| C95800 | CA958 | C95810 | AB2 | CuAl10Ni | 1565-1998- C95210/C95810 | 1490 AB2 | ASTM 952/SAE 68A/68B | C95500 |
Common Types of Aluminium Bronze CA 104 Sheet & Plate
Aluminium Bronze Alloy CA 104 Hot Rolled Sheets
Aluminium Bronze
Sheets
Aluminium Bronze AB2 Cold Rolled Plate
Aluminium Bronze
Plates
AB2 Aluminium Bronze Sheets & Plates Technical Data Sheet
Aluminium Bronze AB2 Sheet Standard Size
CA 104 Aluminium Bronze Alloy Sheet Thickness
CA 104 Aluminium Bronze Plate Weight Chart in Kg
AB2 Aluminium Bronze Sheet Sizes
AB2 Aluminium Bronze Sheet Price List
| Price List of Aluminium Bronze CA 104 Sheet | Aluminium Bronze AB2 Plate Price in India (INR) | AB2 Aluminium Bronze Alloys Sheet Price in USD | Aluminium Bronze CA 104 Plates Price in UAE (Dirham) |
| CA 104 Aluminium Bronze Sheets Price | ₹ 300-₹ 500 | $ 10.11 USD | 40.43 AED |
| Aluminium Bronze AB2 Sheet Price Per Kg | ₹ 500-₹ 700 | $ 15.27 USD | 30.02 AED |
| C61400 Aluminum Bronze Plate Price | ₹ 423-₹ 550 | $ 13.42 USD | 30.88 AED |
| 16 Gauge Aluminium Bronze Alloy CA 104 Sheet Price | ₹ 350-₹ 550 | $ 28.35 USD | 42.96 AED |
| 24 Gauge Aluminium Bronze AB2 Sheet Price | ₹ 650-₹ 750 | $ 26.90 USD | 45.92 AED |
| 6mm Aluminium Bronze CA 104 Plate Price | ₹ 500-₹ 700 | $ 19.86 USD | 45.52 AED |
| CA 104 Aluminium Bronze Sheet Price | ₹ 13454-₹ 15255 | $ 48.71 USD | 80.03 AED |
| Price of 1mm C61400 Aluminum Bronze Plate Sheet | ₹ 1360-₹ 1600 | $ 35.24 USD | 43.28 AED |
| CA 104 Aluminium Bronze Plate Price | ₹ 400-₹ 850 | $ 15.49 USD | 65.18 AED |
| AB2 Aluminium Bronze Sheet Price | ₹ 1500-₹ 1800 | $ 34.87 USD | 33.29 AED |
Check AB2 Aluminium Bronze Sheet Standard Size, Thickness, Weight and CA 104 Aluminium Bronze Perforated Sheet Price per kg in Mumbai.
Inspection
Surface and Dimension Test, Mechanical Properties Test(tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Chemical Composition Inspection, No-destructive Test, Hydrostatic Test.
Finish Types
- No.4 Finish
- Mirror Finish
- Brushed Finish
- Polished Finishes
- No. 2B – Matte finish
Packing
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Marking
Our products are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases.
CA 104 Aluminium Bronze Sheet Chemical Composition
| Cu | Sn | Zn | Ni | Al | Fe | Mn | Pb |
| 79% min | 0.10% max | 0.50% max | 4.00 – 5.00% | 8.50 – 9.50% | 3.50 – 4.50% | 0.80 – 1.50% | 0.05% max |
AB2 Aluminium Bronze Plate Mechanical Properties
| Tensile Strength MPa | 0.2% Proof Stress MPa | Elongation % | Hardness HB |
| 590 - 655 | 240 - 260 | 18 - 25 | 150 - 170 |
Other Types of Aluminium Bronze AB2 Sheet & Plate
Aluminium Bronze Sheet
- Aluminium Bronze Alloys CA 104 Sheet
- ASME SB150 AB2 Aluminium Bronze Sheets
- CA 104 Aluminium Bronze Alloys Sheet
- CuAl10Ni Sheets
- AB2 Sheet
- Aluminium Bronze CA 104 Sheet Supplier in Mumbai
- AB2 Aluminium Bronze Alloy Cold Rolled Sheet
- Aluminium Bronze CA 104 Sheet
- AB2 Aluminium Bronze Alloys Sheet Weight Calculator
- CA 104 Aluminium Bronze Sheets
- Aluminium Bronze AB2 Sheets
- CA 104 Aluminium Bronze Alloys Sheet 10mm
- C61400 Aluminum Bronze Sheet Manufacturer in India
- ASTM B150 CA 104 Aluminium Bronze Alloy Sheet
- AB2 Aluminium Bronze Sheet Distributors
- Aluminium Bronze Alloys CA 104 Sheet Suppliers in India
- UNS C95800 Sheets
- AB2 Aluminium Bronze Checker Sheet Dealers
- Aluminium Bronze CA 104 Sheet
- Thin C61400 Aluminum Bronze Sheet Stockist
- UNS C95800 Sheets
- Aluminium Bronze CA 104 HR Sheets
- Aluminium Bronze AB2 Cold Rolled Sheets
- CA 104 Sheet
- AB2 Sheet Suppliers
- Aluminium Bronze Alloys CA 104 Sheet Manufacturer in India
- AB2 Aluminium Bronze Sheets Cut To Size
- Aluminium Bronze CA 104 Sheet Supplier in Mumbai
- 10 Gauge Aluminium Bronze Alloy AB2 Sheet
- Aluminium Bronze AB2 Sheet Suppliers in India
- Aluminium Bronze Alloys CA 104 Sheet Manufacturer in Mumbai
- 2mm AB2 Aluminium Bronze Alloy Sheet
- CuAl10Ni Sheet
- C61400 Aluminum Bronze Sheet Manufacturer in Mumbai
Aluminium Bronze Plate
- AB2 Aluminium Bronze Plates Manufacturers In India
- Aluminium Bronze CA 104 HR Plates
- CA 104 Aluminium Bronze Alloy Plate Manufacturers in India
- CuAl10Ni Plate
- AB2 Aluminium Bronze Alloys Plates Suppliers
- UNS C95800 Plates
- Aluminium Bronze Alloys Plate Suppliers
- 3mm Aluminium Bronze CA 104 Plate
- Aluminium Bronze Alloy AB2 Plates Supplier in Mumbai
- Aluminium Bronze Flat Plates
- AB2 Aluminium Bronze Plate
- Aluminium Bronze AB2 Plates Suppliers in India
- ASME SB150 CA 104 Aluminium Bronze Plate
- CA 104 Aluminium Bronze Plates Weight Calculator
- AB2 Aluminium Bronze Plates
- CA 104 Aluminium Bronze CR Plate Manufacturers
- Aluminium Bronze Alloy CA 104 Cold Rolled Plate
- ASTM B150 AB2 Aluminium Bronze Alloys Plates
- CuAl10Ni Plates
- C61400 Aluminum Bronze Plate
- AB2 Aluminium Bronze Plate HS Code
- Aluminium Bronze CA 104 HR Plates
- Aluminium Bronze Alloy AB2 Plate Suppliers in India
- Thin C61400 Aluminum Bronze Plates
- Aluminium Bronze AB2 Plate Price Today
- Aluminium Bronze CA 104 Plate Manufacturer in India
- AB2 Aluminum Bronze Alloys CR Plate
- Aluminium Bronze Alloy CA 104 Plate Manufacturer in Mumbai
- AB2 Aluminium Bronze Hot Rolled Steel Plate
- C61400 Aluminum Bronze Plate Manufacturers
- Aluminum Bronze Alloys AB2 Plate Suppliers in Mumbai
- UNS C95800 Plate
- Aluminium Bronze CA 104 Plate Manufacturer in Mumbai
- AB2 Aluminium Bronze Alloy Plates Price
AB2 Aluminium Bronze Plate Manufacturing Process
Finishes Of CA 104 Aluminium Bronze Plate
| Surface finish | Thickness (mm) | Width (max mm) |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
| 2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
| 2B – Cold rolled, heat treated, pickled, skin passed Sheet | 0.25–8.0 | 2032 |
| 2D – Cold rolled, heat treated, pickled Sheet | 0.4–6.35 | 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
| Polished, brushed plate | 0.5–4.0 | 1524 |
| Surface finish | Gauge (in) | Width (max in) |
| Polished Sheet (not brushed) | 11–24 | 60 |
| 2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
| 2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
Aluminium Bronze CA 104 Plates Industrial Application
Oil & Gas
Industry
Power Plant
Generation
Marine
Industry
Petrochemical
Industry
Chemical
Industry
Aerospace
Industry
Sugar
Industry
Contact Renox Impex today for a best offer & competitive quotation Of AB2 Thin Aluminium Bronze Sheets.
Call : +91 80806 99454 / Email : [email protected]
-
India
-
Japan
-
Russia
-
United States
-
Saudi Arabia
-
Kuwait
-
Singapore
-
Malaysia
-
UAE
-
Germany
-
Italy
-
China
-
UK
-
Canada
-
Iran
-
Thailand
-
South Korea
-
Turkey
-
Morocco
-
Costa Rica
-
Kazakhstan
-
Philippines
-
Egypt
-
Vietnam
-
Oman
-
Australia
-
Qatar
-
Portugal
-
Colombia
-
Iraq
-
Tobago
-
Tobago
-
Myanmar
-
Jordan
-
Poland
-
Romania
-
Indonesia
-
Ukraine
-
Greece
-
Nigeria
-
Taiwan
-
Brazil
-
South Africa
-
Mexico
-
Bangladesh
-
France
-
Sri Lanka
-
Hong Kong
-
Cyprus
-
Angola
-
Venezuela
-
Spain
-
Czechia
-
Chile
-
Netherlands
-
Norway
ISO 9001 : 2015
Certified
Check Today's price of CA 104 Aluminium Bronze Sheet in India
We also supply AB2 Aluminium Bronze Plate at the best price. You can check our latest CA 104 Aluminium Bronze Plate price list. Contact Renox Impex today for a best offer & competitive quotation Of AB2 Aluminium Bronze Alloy Sheet.
Phone: +91 80806 99454
Email: [email protected]