Aluminium 1050 Sheets Supplier, Stockist in India

[email protected]

+91 80806 99454

ASTM B209 Alloy 1050 Sheet

1050 Aluminium Sheets
UNS A91050 Plate

Aluminium 1050 Plates
3.0255 Sheets

WNR. 3.0255 Sheets

1050 ALUMINIUM ALLOY, ALUMINIUM 1050, ALUMINIUM 1050 H24, 1050 H14 ALUMINIUM SHEET, ALUMINIUM 1050 CHEMICAL COMPOSITION, ALUMINIUM ALLOY 1050 PROPERTIES, ALUMINIUM GRADE 1050

Aluminium 1050 sheets and plates are a high-purity, non-heat-treatable alloy with 99.5 % pure aluminium. They provide good corrosion resistance, high thermal conductivity and flexibility. Aluminium 1050 is well known for its workability, and therefore, it can be useful in places where strength is not a paramount factor. It is available in H24 and H14 hardness and is widely used and easily formed because of its specific composition and added properties suitable for various industries.

Table of Content

Renox Impex is India's leading stockist and supplier of 1050 sheets and plates, catering to various industries with our premium-grade aluminium sheet. We focus on sourcing the best materials and delivering them with exceptional service, ensuring clients receive plates that meet their specific needs for durability, performance and cost-effectiveness. We are dedicated to providing aluminium 1050 sheets that embody excellence, ensuring optimal results for various applications.

These plates and sheets have several characteristics which make them suitable for many applications in the industrial sector. This alloy has high corrosion resistance, which helps to shield it from various environmental and chemical aggressions. Its superior flexibility allows it to be easily bent, shaped and formed into various configurations, while its excellent thermal conductivity makes it ideal for applications involving heat dissipation. These are non-toxic and environmentally friendly, making them suitable for food applications. Its reflective surface is an added advantage in lighting fixtures and decorative uses. The mechanical properties, including yield strength and flexibility, allow them to perform reliably under moderate pressure and weight-bearing conditions. These features collectively make them an excellent choice for diverse industries, ensuring durability and functionality.

1050 ALUMINIUM SHEET, ALUMINIUM 1050 MECHANICAL PROPERTIES ALUMINIUM 1050 PRICE, ALUMINIUM 1050 PROPERTIES, ALUMINIUM 1050 YIELD STRENGTH, ALUMINIUM 1050 DEALERS

The 1050 plates are applied in different areas, like the electrical industry, for use as a conductor, as they have high electrical conductivity in components like busbars and wires. It also has good chemical resistance, making it ideal for chemical storage tanks, where the material is exposed to the elements. These sheets are preferred in the food industry for packaging and containers since they are safe, non-toxic and contamination proof. It is also frequently used in architectural design, where the reflective surface of the product is an added bonus. Lighting fixtures, solar reflectors and heat exchangers utilise aluminium 1050 because its reflective and thermal properties are impressive. Such applications demonstrate the versatility and effectiveness of the aluminium 1050 plates in different industries.

Quality assurance is one of the critical strategies we use to support our efforts towards quality and improvement. Every aluminium 1050 sheet and plate we offer undergoes a specific quality control check before it is supplied to our customers. Our team inspects the products to ensure that they meet the required chemical composition, and each sheet is checked to meet the required standard. The yield and tensile strength of the material are also checked thoroughly to achieve the industry's mechanical requirements.

Renox Impex provides you with the highest-quality Aluminium 1050 Sheets. We offer Aluminium 1050 H24, 1050 H14, plates and sheets and other specifications based on your requirements at the most affordable price range. Contact us for your Aluminium 1050 Sheets and Plates.

1050 ALUMINUM PLATE IN INDIA, 1050 ALUMINUM PLATE SUPPLIERS FROM INDIA, 1050 ALUMINUM PLATE EXPORTERS IN MUMBAI, ALUMINIUM 1050 SHEETS IN BANGALORE

1050 Aluminium Sheets Specifications

Specifications	ASTM B209 / ASME SB209, BS EN 10088-2, en 10028-7, IS 6911
Dimensions	MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range	Cold Rolled : 0.5-6.4 mm Hot Rolled : 3.0–10.0 mm
Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness	0.3 mm to 120 mm
International Standard of Sheets	ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510
Tolerances (width / thickness)	EN 10258/ DIN 59381 EN 10151 EN 10088
Finish	2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, mirror etc.
Hardness	Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Form	Sheet, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, soft annealed, descaled, sheared, annealed
Value Added Service	Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Profiling	Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting

Aluminium 1050 Sheets Equivalent Grades

European Standard	GERMANY	UNS	WERKSTOFF NR.
EN AW-1050 A	Al99.5	A91050	3.0255

Common Types of Aluminium 1050 Sheet & Plate

Aluminium Alloy 1050 Chequered Plate

1050 Aluminium Perforated Sheet

Aluminium 1050 Hot Rolled Sheets

Aluminium 1050 Cold Rolled Plate

Quick Contact

[email protected]

Top industrial suppliers of Aluminum 1050 Grade near Mumbai, Contact us today for the Aluminium 1050 Price.

Request a Quote

Testing
Packaging

Inspection

Surface and Dimension Test, Mechanical Properties Test(tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Chemical Composition Inspection, No-destructive Test, Hydrostatic Test.

Finish Types

No.4 Finish
Mirror Finish
Brushed Finish
Polished Finishes
No. 2B – Matte finish

Packing

Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.

Marking

Our products are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases.

Aluminium 1050 Chemical Composition

%	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Al	Others
Minimum	-	-	-	-	-	-	-	-	-	-
Maximum	0,25	0,40	0,05	0,05	0,05	-	0,07	0,05	99,5	0,03

Aluminium 1050 Mechanical Properties

Treatment State	Nominal thickness mm		Rm MPa		Rp0,2 MPa		Min. elongation %		Bending radius a)		Hardness HBS 1)
Treatment State	Greater than	up to	min.	max.	min.	max.	A50mm	A	180º	90º	Hardness HBS 1)
F	³2,5	150,0	65
O/H111	0,2	0,5	65	95	20		20		0 t	0 t	20
	0,5	1,5	65	95	20		22		0 t	0 t	20
	1,5	3,0	65	95	20		26		0 t	0 t	20
	3,0	6,0	65	95	20		29		0,5 t	0,5 t	20
	6,0	12,5	65	95	20		35		1,0 t	1,0 t	20
	12,5	50,0		95	20			32			20
H14	0,2	0,5	105	145	85		2		1,0 t	0 t	34
	0,5	1,5	105	145	85		3		1,0 t	0,5 t	34
	1,5	3,0	105	145	85		4		1,0 t	1,0 t	34
	3,0	6,0	105	145	85		5			1,5 t	34
	6,0	12,5	105	145	85		6			2,5 t	34
	12,5	25,0	105	145	85			6			34
H16	0,2	0,5	120	160	100		1			0,5 t	39
	0,5	1,5	120	160	100		2			1,0 t	39
	1,5	4,0	120	160	100		3			1,5 t	39
H18	0,2	0,5	140		120		1			1,0 t	42
	0,5	1,5	140		120		2			2,0 t	42
	1,5	3,0	140		120		2			3,0 t	42
H24	0,2	0,5	105	145	75		3		1,0 t	0 t	33
	0,5	1,5	105	145	75		4		1,0 t	0,5 t	33
	1,5	3,0	105	145	75		5		1,0 t	1,0 t	33
	3,0	6,0	105	145	75		8		1,5 t	1,5 t	33
	6,0	12,5	105	145	75		8			2,5 t	33
H26	0,2	0,5	120	160	90		2			0,5 t	38
	0,5	1,5	120	160	90		3			1,0 t	38
	1,5	4,0	120	160	90		4			1,5 t	38

a) Multiply the coefficient by the sheet thickness

Aluminium 1050 Physical Properties

Property	Value
Modulus of Elasticity (N/mm²)	69,000
Specific Weight (g/cm³)	2.70
Melting Temperature (°C)	646-657
Linear Expansion Coefficient (1/10⁶K)	23.5
Thermal Conductivity (W/mK)	229
Electrical Resistivity at 20°C (μΩ cm)	2.9
Electrical Conductivity (% IACS)	59.5
Dissolution Potential (V)	-0.84

Other Types of Aluminium 1050 Sheet & Plate

Aluminium Sheet

1050 Aluminium Cold Rolled Sheet
1050 Aluminium Sheet Distributors
1050 Sheet
1050 Aluminium Sheet
Aluminium 1050 Sheet Manufacturer in Mumbai
UNS A91050 Sheets
Aluminium H111 Sheet
10 Gauge Aluminium 1050 Sheet
3.0255 Sheet
Aluminium Alloy 1050 Sheet
UNS A91050 Sheets
1050 Aluminium Sheets Cut To Size
Aluminium Alloy 1050 Sheet Suppliers in India
ASME SB209 T6 Aluminium Sheets
Aluminium Alloy 1050 Cold Rolled Sheets
1050 Aluminium Alloy Checker Sheet Dealers
1050 Aluminium Sheet Weight Calculator
Aluminium 1050 Sheet
Aluminium 1050 Sheets Manufacturer in India
2mm 1050 Aluminium Sheet
ASTM B209 1050 Aluminium Sheet
Aluminium Alloy H111 Sheet Supplier in Mumbai
1050 Aluminium Sheets
1050 Sheet
1050 Sheet Suppliers
1050 Aluminium Sheet 10mm
Aluminium 1050 Sheet Suppliers in India
Aluminium Alloy 1050 HR Sheets
Thin Aluminium 1050 Sheets Stockist
3.0255 Sheets
Aluminium 1050 Sheet Supplier in Mumbai
Aluminium 1050 Sheet Manufacturer in India
Aluminium Alloy 1050 Sheets
Aluminium Alloy 2017 Sheet Manufacturer in Mumbai

Aluminium Plate

1050 Aluminium Plates Manufacturers In India
Aluminium Alloy 1050 HR Plates
1050 Aluminium Plate Manufacturers in India
3.0255 Plate
1050 Aluminium Plates Suppliers
UNS A91050 Plates
3mm Aluminium 1050 Plate
Aluminium 1050 Plates Supplier in Mumbai
Aluminium Alloy 1050 Plates Suppliers in India
1050 Aluminium Plate
ASME SB209 1050 Aluminium Plate
1050 Aluminium Alloy Plates Weight Calculator
1050 Aluminium Plates
1050 Aluminium CR Plate Manufacturers
Aluminium Plate Suppliers
3.0255 Plates
Aluminium Alloy 1050 Plate Price Today
Aluminium 1050 Cold Rolled Plate
ASTM B209 1050 Aluminium Plates
1050 Aluminium Plate
1050 Aluminium Alloy Plate HS Code
Thin Aluminium 1050 Plates
Aluminium Alloy 1050 Plate Manufacturer in India
1050 Aluminium CR Plate
Aluminium 1050 Plate Manufacturer in Mumbai
1050 Aluminium Alloy Hot Rolled Steel Plate
1050 Aluminium Plate Manufacturers
Aluminium Alloy H111 HR Plates
Aluminium 1050 Plate Suppliers in India
Aluminium Flat Plates
Aluminium 1050 Plate Suppliers in Mumbai
Aluminium Alloy 1050 Plate Manufacturer in Mumbai
UNS A91050 Plate
1050 Aluminium Plates Price

1050 Aluminium Plate Manufacturing Process

Finishes Of 1050 Aluminium Plate

Surface finish	Thickness (mm)	Width (max mm)
Polished, brushed plate	0.5–4.0	1524
2R – Cold rolled, bright annealed plate	0.25–3.5	1524
2H – Work hardened plate	0.4–6.35	1524
2D – Cold rolled, heat treated, pickled Sheet	0.4–6.35	1524
2E – Cold rolled, heat treated, mechanically descaled plate	0.4–8.0	2032
2B – Cold rolled, heat treated, pickled, skin passed Sheet	0.25–8.0	2032
Surface finish	Gauge (in)	Width (max in)
Polished Sheet (not brushed)	11–24	60
2B – Cold rolled, heat treated, pickled, skin passed Plate	10–24	72*
2D – Cold rolled, heat treated, pickled plate	12–24	60