-
ASTM B209 Alloy 2014 Sheet
2014 Aluminium Sheets
-
UNS A92014 Plate
Aluminium 2014 Plates
-
3.1255 Sheets
WNR. 3.1255 Sheets
2014 Aluminium Sheets, 2014 Aluminium Sheet, Aluminium 2014 Plates, 2014 Plate Suppliers in Mumbai.
Aluminium Alloy 2014 Sheets Plates are strong and lightweight alloys that offer excellent corrosion resistance and high strength-to-weight ratio. The alloy is well suited for applications where higher strength, good machinability, formability, and fatigue resistance are needed. Aluminium Alloy 2014 Sheets/Plates can be used in a wide range of industries such as aerospace, automotive, naval engineering applications and general fabrication work. The alloy offers high electrical conductivity, making it suitable for use in electronics applications, while its low melting point makes it ideal for welding and soldering operations. Its light weight also makes it an ideal choice when high strength-to-weight ratios are required. Aluminium Alloy 2014 Sheets/Plates combines excellent mechanical properties with good heat treatability, resulting in an alloy that is stronger and more resistant to corrosion than standard aluminium alloys.
Table of Content
Aluminium Alloy 2014 Sheets/Plates offer superior performance for applications where strength and corrosion resistance are paramount. The sheets are available in a variety of sizes, thicknesses, and finishes to meet the needs of any project. With its superior strength-to-weight ratio, Aluminium Alloy 2014 Sheets/Plates provide cost-effective solutions for a wide range of applications.
Aluminium 2014 Sheets, 2014 Sheet, Aluminium Alloy 2014 Plate, 3.1255 Plates, Aluminium Alloy 2014 Plates, 2014 Aluminium Sheet, Aluminium 2014 Plate, 2014 Plate Suppliers, UNS A92014 Sheet, 2014 Aluminium Plate, 2014 Aluminium Sheet Manufacturers In India.
This versatile alloy has been used extensively in the aerospace and automotive industries due to its ability to resist corrosion even in highly corrosive environments such as salt water or high temperatures. In addition, the increased strength and fatigue resistance of the alloy makes it a viable alternative for many industrial applications.
At Renox Impex, our Aluminium Alloy 2014 Sheets/Plates meet industry standards and specifications. Our experienced staff can help you select the right materials for your project, ensuring that you get the most out of your investment. Contact us today to learn more about our Aluminium Alloy 2014 product line.
Get Alloy 2014 Plate Suppliers in Mumbai at Factory Price, Wide range of 2014 Thin Aluminium Sheets as per JIS, AISI, ASTM, GB standard, Aluminium Sheet 2014 Stock, Bulk Stockholders Of 2mm 2014 Aluminium Sheet In India.
2014 Aluminium Sheets Specifications
| Specifications | ASTM B209 / ASME SB209, BS EN 10088-2, en 10028-7, IS 6911 |
| Dimensions | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Size Range |
Cold Rolled : 0.5-6.4 mm Hot Rolled : 3.0–10.0 mm |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| International Standard of Sheets |
ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) |
EN 10258/ DIN 59381 EN 10151 EN 10088 |
| Finish | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, mirror etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, soft annealed, descaled, sheared, annealed |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Profiling |
Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Aluminium 2014 Sheets Equivalent Material
| European Standard | BS (OLD) | WNr | UNS | ISO | USA (AA) | GERMANY (DIN) | IS | Canadian |
| EN AW-2014 | HE15 | 3.1255 | A92014 | AlCu4SiMg | 2014 | AlCuSiMn | 24345 | B26S |
Common Types of Aluminium 2014 Sheet & Plate
Aluminium Alloy 2014 Chequered Plate
2014 Aluminium Perforated Sheet
Aluminium 2014 Hot Rolled Sheets
Aluminium 2014 Cold Rolled Plate
2014 Aluminium Sheets & Plates Technical Data Sheet
Aluminium 2014 Sheet Standard Size
2014 Aluminium Sheet Thickness
2014 Aluminium Alloy Plate Weight Chart in Kg
2014 Aluminium Sheet Sizes
2014 Aluminium Sheet Price List
| Price List of Aluminium 2014 Sheet | Aluminium Alloy 2014 Plate Price in India (INR) | 2014 Aluminium Sheet Price in USD | Aluminium Alloy 2014 Plates Price in UAE (Dirham) |
| 2014 Aluminium Sheets Price | ₹ 260-₹ 800 | $ 11.12 USD | 45.47 AED |
| Aluminium Alloy 2014 Sheet Price Per Kg | ₹ 760-₹ 600 | $ 12.30 USD | 40.05 AED |
| 2014 Aluminium Plates Price | ₹ 320-₹ 650 | $ 20.50 USD | 40.90 AED |
| 16 Gauge Aluminium 2014 Sheet Price | ₹ 320-₹ 400 | $ 26.40 USD | 60.96 AED |
| 24 Gauge Aluminium Alloy 2014 Sheet Price | ₹ 330-₹ 500 | $ 30.90 USD | 60.90 AED |
| 6mm Aluminium Alloy 2014 Plate Price | ₹ 680-₹ 900 | $ 17.90 USD | 50.52 AED |
| 2014 Aluminium Sheet Price | ₹ 13200-₹ 14500 | $ 50.71 USD | 73.03 AED |
| Price of 1mm Aluminium 2014 Sheet | ₹ 1300-₹ 1800 | $ 44.24 USD | 60.28 AED |
| 2014 Aluminium Alloy Plate Price | ₹ 970-₹ 700 | $ 30.49 USD | 65.18 AED |
| 2014 Aluminium Sheet Price | ₹ 1400-₹ 1530 | $ 43.87 USD | 60.29 AED |
Check 2014 Aluminium Sheet Standard Size, Thickness, Weight and 2014 Aluminium Perforated Sheet Price per kg in Mumbai.
Inspection
Surface and Dimension Test, Mechanical Properties Test(tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Chemical Composition Inspection, No-destructive Test, Hydrostatic Test.
Finish Types
- No.4 Finish
- Mirror Finish
- Brushed Finish
- Polished Finishes
- No. 2B – Matte finish
Packing
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Marking
Our products are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases.
2014 Aluminium Sheet Chemical Composition
| Alloy | Al | Si | Fe | Cu | Zn | Mn | Mg | Ti | Other | Cr | Ni | Ti+Zr | Others |
| 2014 (min) (max) | Balance | 0.50 - 0.90 | 0.0 - 0.50 | 3.90 - 5.00 | 0.0 - 0.25 | 0.40 - 1.20 | 0.20 - 0.80 | 0.0 - 0.15 | 0.0 - 0.15 | 0.0 - 0.10 | 0.0 - 0.10 | 0.0 - 0.20 | 0.0 - 0.05 |
2014 Aluminium Plate Mechanical Properties
| Alloy | Temper | Yield Strength (Mpa) | UTS (Mpa) | Elongation (%) | ||
| - | - | Minimum | Maximum | Minimum | Maximum | A 50mm (Minimum) |
| EN AW-2014 | O | – | 135 | – | 250 | 10 |
| T4 | 230 | – | 370 | – | 11 | |
Other Types of Aluminium 2014 Sheet & Plate
Aluminium Sheet
- Aluminium 2014 Sheet Supplier in Mumbai
- Aluminium 2014 Sheet Manufacturer in India
- 2014 Aluminium Sheet
- 2014 Aluminium Sheet Distributors
- Aluminium 2014 Sheet
- 2014 Sheet
- 2014 Aluminium Sheet Weight Calculator
- Aluminium Alloy 2014 HR Sheets
- Aluminium Alloy 2014 Sheets
- 2014 Aluminium Sheet 10mm
- 2014 Sheet
- 2014 Aluminium Sheets
- UNS A92014 Sheets
- 2014 Aluminium Alloy Checker Sheet Dealers
- Aluminium 2014 Sheets Manufacturer in India
- 3.1255 Sheets
- Aluminium Alloy 2014 Cold Rolled Sheets
- Thin Aluminium 2014 Sheets Stockist
- 2014 Aluminium Sheets Cut To Size
- Aluminium Alloy 2014 Sheet Supplier in Mumbai
- UNS A92014 Sheets
- Aluminium 2014 Sheet Manufacturer in Mumbai
- Aluminium Alloy 2014 Sheet Manufacturer in Mumbai
- ASME SB209 2014 Aluminium Sheets
- 3.1255 Sheet
- ASTM B209 2014 Aluminium Sheet
- Aluminium 2014 Sheet Suppliers in India
- 2mm 2014 Aluminium Sheet
- Aluminium 2014 Sheet
- Aluminium Alloy 2014 Sheet
- 10 Gauge Aluminium 2014 Sheet
- 2014 Aluminium Cold Rolled Sheet
- 2014 Sheet Suppliers
- Aluminium Alloy 2014 Sheet Suppliers in India
Aluminium Plate
- 3.1255 Plates
- 2014 Aluminium Alloy Plate HS Code
- 3.1255 Plate
- Thin Aluminium 2014 Plates
- Aluminium Plate Suppliers
- 2014 Aluminium Plates Suppliers
- Aluminium 2014 Plate Suppliers in India
- Aluminium 2014 Plate Suppliers in Mumbai
- 2014 Aluminium Plate Manufacturers
- UNS A92014 Plates
- Aluminium Alloy 2014 Plates Suppliers in India
- ASTM B209 2014 Aluminium Plates
- 2014 Aluminium CR Plate
- 2014 Aluminium Plates Manufacturers In India
- Aluminium Alloy 2014 Plate Price Today
- 2014 Aluminium Alloy Plates Weight Calculator
- Aluminium 2014 Plates Supplier in Mumbai
- 2014 Aluminium Alloy Hot Rolled Steel Plate
- 2014 Aluminium CR Plate Manufacturers
- Aluminium 2014 Plate Manufacturer in Mumbai
- 2014 Aluminium Plate
- Aluminium Alloy 2014 HR Plates
- UNS A92014 Plates
- 2014 Aluminium Plates Price
- Aluminium Alloy 2014 HR Plates
- Aluminium Alloy 2014 Plate Manufacturer in India
- 2014 Aluminium Plate
- 2014 Aluminium Plate Manufacturers in India
- Aluminium 2014 Cold Rolled Plate
- 3mm Aluminium 2014 Plate
- Aluminium Flat Plates
- Aluminium Alloy 2014 Plate Manufacturer in Mumbai
- ASME SB209 2014 Aluminium Plate
- 2014 Aluminium Plates
2014 Aluminium Plate Manufacturing Process
Finishes Of 2014 Aluminium Plate
| Surface finish | Thickness (mm) | Width (max mm) |
| Polished, brushed plate | 0.5–4.0 | 1524 |
| 2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
| 2D – Cold rolled, heat treated, pickled Sheet | 0.4–6.35 | 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2B – Cold rolled, heat treated, pickled, skin passed Sheet | 0.25–8.0 | 2032 |
| Surface finish | Gauge (in) | Width (max in) |
| Polished Sheet (not brushed) | 11–24 | 60 |
| 2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
| 2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
Aluminium 2014 Plates Industrial Application
Oil & Gas
Industry
Power Plant
Generation
Marine
Industry
Petrochemical
Industry
Chemical
Industry
Aerospace
Industry
Sugar
Industry
Contact Renox Impex today for a best offer & competitive quotation Of 2014 Thin Aluminium Sheets.
Call : +91 80806 99454 / Email : [email protected]
-
India
-
Japan
-
Russia
-
United States
-
Saudi Arabia
-
Kuwait
-
Singapore
-
Malaysia
-
UAE
-
Germany
-
Italy
-
China
-
UK
-
Canada
-
Iran
-
Thailand
-
South Korea
-
Turkey
-
Morocco
-
Costa Rica
-
Kazakhstan
-
Philippines
-
Egypt
-
Vietnam
-
Oman
-
Australia
-
Qatar
-
Portugal
-
Colombia
-
Iraq
-
Tobago
-
Tobago
-
Myanmar
-
Jordan
-
Poland
-
Romania
-
Indonesia
-
Ukraine
-
Greece
-
Nigeria
-
Taiwan
-
Brazil
-
South Africa
-
Mexico
-
Bangladesh
-
France
-
Sri Lanka
-
Hong Kong
-
Cyprus
-
Angola
-
Venezuela
-
Spain
-
Czechia
-
Chile
-
Netherlands
-
Norway
ISO 9001 : 2015
Certified
Check Today's price of 2014 Aluminium Sheet in India
We also supply 2014 Aluminium Plate at the best price. You can check our latest 2014 Aluminium Plate price list. Contact Renox Impex today for a best offer & competitive quotation Of 2014 Aluminium Sheet.
Phone: +91 80806 99454
Email: [email protected]