-
ASTM A240 DSS S31803 Sheet
S31803 Duplex Steel Sheets
-
UNS S31803 Plate
Duplex Steel S31803 Plates
-
1.4462 Coils
WNR. 1.4462 Coils
S31803 Duplex Steel Sheet, F51 Duplex Steel Coils, Duplex Steel S31803 Plates, S31803 Plate Suppliers in Mumbai.
Duplex Steel S31803 Sheet Plate Coils
typically contains approximately 22% chromium, 5-6% nickel, 3%
molybdenum, and small amounts of other elements like nitrogen
and manganese. Duplex steel S31803, also known as 2205, is a
type of duplex stainless steel. It is characterized by its high
strength and excellent corrosion resistance properties. The
duplex structure of this steel consists of equal proportions of
austenite and ferrite phases, which contribute to its unique
combination of mechanical and corrosion-resistant properties.
Duplex steel S31803 Coils offers several advantages,
including:
• Superior corrosion resistance compared to standard austenitic
or ferritic stainless steel.
• Higher strength, allowing for lighter-weight designs.
• Good resistance to stress corrosion cracking and pitting
corrosion.
• Excellent toughness and ductility, even at low temperatures.
• Good weldability and workability.
Table of Content
Duplex steel S31803 Sheets exhibit good resistance to general corrosion, pitting corrosion, and crevice corrosion in various environments. Duplex steel S31803 Plates have higher strength compared to austenitic stainless steel, offering good load-bearing capacity. Duplex steel S31803 Sheets find applications in various industries, including oil and gas, chemical processing, petrochemical, desalination, pulp and paper, and marine environments. They are commonly used for making heat exchangers, pressure vessels, tanks, pipelines, structural components, and other equipment requiring corrosion resistance and strength.
S31803 Sheet, 1.4462 Plates, S31803 Jindal Duplex Steel Sheet, SS F51 Coils, SS F51 Plate, UNS S31803 Sheet, S31803 Plate Suppliers, S31803 Duplex Steel Coil, S31803 Duplex Steel Plate, F51 Duplex Steel Sheet Manufacturers In India.
Duplex steel S31803 sheet plates and coils are available in various sizes and dimensions, depending on the manufacturer and specific requirements. Common thicknesses for sheets and plates range from 0.5 mm to 50 mm, while coil widths can vary from 1000 mm to 2000 mm or more.
Get DSS S31803 Plate Suppliers in Mumbai at Factory Price, Wide range of S31803 Thin Duplex Steel Sheets as per JIS, AISI, ASTM, GB standard, Jindal Duplex Steel Sheet S31803 Stock, Bulk Stockholders Of 2mm F51 Duplex Steel Sheet In India.
S31803 Duplex Steel Sheets Specifications
| Specifications | ASTM A240 / ASME SA240, BS EN 10088-2, en 10028-7, IS 6911 |
| Dimensions | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Size Range |
Cold Rolled : 0.5-6.4 mm Hot Rolled : 3.0–10.0 mm |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| International Standard of Sheets |
ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) |
EN 10258/ DIN 59381 EN 10151 EN 10088 |
| Finish | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, mirror etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, soft annealed, descaled, sheared, annealed |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Profiling |
Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Duplex Steel F51 Sheets Equivalent Material
| STANDARD | WERKSTOFF NR. | UNS |
| Duplex Steel | 1.4462 | S31803 / S32205 |
Common Types of Duplex Steel S31803 Sheet & Plate
DSS S31803 Chequered Plate
F51 Duplex Steel
Coils
DSS S31803
Coils
F51 DSS Perforated
Sheet
Duplex Steel S31803
Coils
Duplex Steel S31803 Hot Rolled Sheets
Duplex Steel F51 Cold Rolled Plate
S31803 Matt PVC Duplex Steel Sheet
S31803 Duplex Steel Sheets & Plates Technical Data Sheet
Duplex Steel S31803 Sheet Standard Size
S31803 Duplex Steel Sheet Thickness
F51 DSS Plate Weight Chart in Kg
S31803 Duplex Steel Sheet Sizes
F51 Duplex Steel Sheet Price List
| Price List of Duplex Steel S31803 Sheet | DSS S31803 Plate Price in India (INR) | S31803 DSS Sheet Price in USD | DSS S31803 Plates Price in UAE (Dirham) |
| S31803 Duplex Steel Sheets Price | ₹ 500-₹ 700 | $ 8.11 USD | 25.43 AED |
| DSS S31803 Sheet Price Per Kg | ₹ 268-₹ 350 | $ 5.27 USD | 15.02 AED |
| F51 Duplex Steel Plates Price | ₹ 198-₹ 250 | $ 6.42 USD | 10.88 AED |
| 16 Gauge Duplex Stainless Steel S31803 Sheet Price | ₹ 356-₹ 465 | $ 8.35 USD | 19.96 AED |
| 24 Gauge Duplex S31803 Sheet Price | ₹ 645-₹ 845 | $ 9.87 USD | 30.92 AED |
| 6mm F51 Duplex Steel Plate Price | ₹ 480-₹ 600 | $ 7.86 USD | 25.52 AED |
| Jindal S31803 DSS Sheet Price | ₹ 1205-₹ 1400 | $ 17.71 USD | 60.03 AED |
| Price of 1mm Duplex Steel S31803 Sheet | ₹ 1166-₹ 1566 | $ 19.24 USD | 55.28 AED |
| F51 Duplex Coils Price | ₹ 450-₹ 650 | $ 8.49 USD | 30.18 AED |
| S31803 Duplex Steel Coil Price | ₹ 1300-₹ 1500 | $ 20.87 USD | 60.29 AED |
Check S31803 Duplex Steel Sheet Standard Size, Thickness, Weight and F51 Duplex Steel Perforated Sheet Price per kg in Mumbai.
Inspection
Surface and Dimension Test, Mechanical Properties Test(tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Chemical Composition Inspection, No-destructive Test, Hydrostatic Test.
Finish Types
- No.4 Finish
- Mirror Finish
- Brushed Finish
- Polished Finishes
- No. 2B – Matte finish
Packing
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Marking
Our products are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases.
S31803 Duplex Steel Sheet Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| Duplex Steel S31803 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 22 – 23 | 3 – 3.5 | 4.50 – 6.50 | 0.14 – 0.20 | 63.72 min |
F51 Duplex Steel Plate Mechanical Properties
| Density | Melting Point (°C) | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.8 g/cm 3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
Other Types of Duplex Steel S31803 Sheet & Plate
Duplex Steel Sheet and Plate
- S31803 Duplex Steel Sheets Cut To Size
- Jindal F51 Duplex Steel Sheet
- DSS S31803 Sheet Manufacturer in India
- S31803 Duplex Steel Sheet Distributors
- S31803 Duplex Checker Plate Dealers
- 10 Gauge Duplex Steel S31803 Sheet
- DSS F51 Sheet Manufacturer in Mumbai
- 2mm S31803 Duplex Steel Sheet
- S31803 Duplex Steel Plate
- DSS S31803 Plate Supplier in Mumbai
- F51 Duplex Steel Sheet
- ASTM A240 S31803 Duplex Steel Plate
- Duplex Steel S31803 Sheet
- S31803 Duplex Steel Sheet Weight Calculator
- ASME SA240 S31803 Duplex Steel Sheets
- Thin Duplex Steel S31803 Sheets Stockist
- Duplex Steel F51 Plates
- Duplex S31803 Plate Suppliers in India
- DSS S31803 Sheet Supplier in Mumbai
- Duplex Steel S31803 HR Sheets
- 1.4462 Sheets
- UNS S31803 Plates
- DSS F51 Plate Manufacturer in Mumbai
- Duplex Steel S31803 Sheet Suppliers in India
- S31803 Duplex Steel Plate 10mm
- 1.4462 Plate
- F51 Sheet
- S31803 Duplex Steel Cold Rolled Plate
- DSS S31803 Plate
- UNS S31803 Sheets
- F51 Plate
- DSS S31803 Cold Rolled Sheets
- S31803 Plate Suppliers
- DSS F51 Plate Manufacturer in India
Duplex Steel Coils
- ASME SA240 S31803 Duplex Steel Coil
- S31803 Duplex Steel Coil Manufacturers
- F51 DSS Coil
- DSS S31803 Cold Rolled Coil
- 1.4462 Coils
- UNS S31803 Sheets
- DSS F51 Coil Manufacturer in Mumbai
- Duplex Steel S31803 Coil Suppliers in India
- F51 Duplex Steel Coil Manufacturers in India
- 1.4462 Coil
- S31803 Duplex Steel Slitting Coil
- Duplex F51 Coils Suppliers in India
- S31803 Duplex Steel Coils
- ASTM A240 F51 Duplex Steel Coils
- Duplex Steel Flat Plates
- S31803 DSS Sheets Weight Calculator
- DSS S31803 Coils Supplier in Mumbai
- Duplex F51 HR Coils
- S31803 Duplex Stainless Steel Coil
- DSS S31803 Coil Suppliers in Mumbai
- Thin Duplex Steel F51 Coils
- DSS S31803 Coil Manufacturer in India
- F51 Duplex Steel Strip Coil Manufacturers
- S31803 Duplex Steel Coil HS Code
- 3mm Duplex Steel F51 Coil
- Jindal DSS S31803 Coil Price Today
- S31803 Duplex Steel Plates Manufacturers In India
- F51 Duplex Stainless Steel Sheets Price
- S31803 Duplex Steel Hot Rolled Steel Coil
- F51 Duplex Steel Sheets Suppliers
- DSS S31803 Plate Manufacturer in Mumbai
- T Shaped Duplex F51 Coils
- Duplex Steel Coil Suppliers
- UNS S31803 Coils
F51 Duplex Steel Plate Manufacturing Process
Finishes Of S31803 Duplex Steel Plate
| Surface finish | Thickness (mm) | Width (max mm) |
| 2B – Cold rolled, heat treated, pickled, skin passed Sheet | 0.25–8.0 | 2032 |
| 2D – Cold rolled, heat treated, pickled Sheet | 0.4–6.35 | 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
| Polished, brushed plate | 0.5–4.0 | 1524 |
| Surface finish | Gauge (in) | Width (max in) |
| 2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
| 2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
| Polished Sheet (not brushed) | 11–24 | 60 |
Duplex Steel S31803 Coils Industrial Application
Oil & Gas
Industry
Power Plant
Generation
Marine
Industry
Petrochemical
Industry
Chemical
Industry
Aerospace
Industry
Sugar
Industry
Contact Renox Impex today for a best offer & competitive quotation Of S31803 Thin Duplex Steel Coils.
Call : +91 80806 99454 / Email : [email protected]
-
India
-
Japan
-
Russia
-
United States
-
Saudi Arabia
-
Kuwait
-
Singapore
-
Malaysia
-
UAE
-
Germany
-
Italy
-
China
-
UK
-
Canada
-
Iran
-
Thailand
-
South Korea
-
Turkey
-
Morocco
-
Costa Rica
-
Kazakhstan
-
Philippines
-
Egypt
-
Vietnam
-
Oman
-
Australia
-
Qatar
-
Portugal
-
Colombia
-
Iraq
-
Tobago
-
Tobago
-
Myanmar
-
Jordan
-
Poland
-
Romania
-
Indonesia
-
Ukraine
-
Greece
-
Nigeria
-
Taiwan
-
Brazil
-
South Africa
-
Mexico
-
Bangladesh
-
France
-
Sri Lanka
-
Hong Kong
-
Cyprus
-
Angola
-
Venezuela
-
Spain
-
Czechia
-
Chile
-
Netherlands
-
Norway
ISO 9001 : 2015
Certified
Check Today's price of S31803 Duplex Steel Sheet in India
We also supply S31803 Duplex Steel Plate at the best price. You can check our latest S31803 Duplex Steel Coils price list. Contact Renox Impex today for a best offer & competitive quotation Of F51 Duplex Steel Sheet.
Phone: +91 80806 99454
Email: [email protected]