-
ASTM B168 Inconel Alloy 718 Sheet
Inconel 718 Sheets
-
UNS N07718 Plate
Inconel N07718 Plates
-
2.4668 Plates
WNR. 2.4668 Plates
718 Inconel Plate, 718 Inconel Alloy Sheet, Alloy 718 Coils, 718 Inconel® Alloy Plate Suppliers in Mumbai.
Inconel 718 Sheets are a nickel-chromium alloy with high strength and good corrosion resistance properties. These sheets are often used in applications that require excellent creep rupture strength, corrosion resistance, and oxidation resistance up to 1500°F (816°C). In addition to its superior heat resistance, Inconel 718 Sheets also offer exceptional tensile and hardness properties compared to other stainless steel grades.
Table of Content
These sheets can be formed into various shapes, such as plates or coils. The Inconel 718 Plates have an especially good surface finish due to their high strength, meaning that they are well suited for applications requiring an aesthetically pleasing look. The Inconel 718 Coils offer superior mechanical properties over other grades of stainless steel, allowing for superior performance in high-temperature applications.
718 Inconel Alloy Plate, Nickel Alloy 718, UNS N07718 Sheet, 2.4668 Plates, 718 Sheet, 718 Inconel Alloy Coils, Inconel® Alloy 718 Coils, Grade 718 Inconel Sheets, 718 Plate Suppliers, Alloy 718 Plate, 718 Inconel Alloy Sheet Manufacturers In India.
Inconel 718 Sheets, Plates, and Coils are used in a variety of industries such as aerospace, oil & gas, chemical processing, and electronics. They provide excellent corrosion resistance to too many acids and salts and can be used in a wide range of temperatures. This makes them ideal for use in extreme environments where other metals may not be suitable. With their superior heat resistance and ability to maintain consistent physical properties at elevated temperatures, Inconel 718 Sheets are an ideal choice for any application requiring outstanding strength and toughness at high temperatures.
Get Inconel Alloy 718 Plate Suppliers in Mumbai at Factory Price, Wide range of 718 Thin Inconel Sheets as per JIS, AISI, ASTM, GB standard, Inconel Alloy Sheet 718 Stock, Bulk Stockholders Of 2mm 718 Inconel Sheet In India.
718 Inconel Alloy Sheets Specifications
| Specifications | ASTM B168 / ASME SB 168, BS EN 10088-2, en 10028-7, IS 6911 |
| Dimensions | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Size Range | Cold Rolled : 0.5-6.4 mm Hot Rolled : 3.0–10.0 mm |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| Tolerances (width / thickness) | EN 10258/ DIN 59381 EN 10151 EN 10088 |
| Finish | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR) |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, soft annealed, descaled, sheared, annealed |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Inconel Alloy 718 Sheets Equivalent Material
| STANDARD | WERKSTOFF NR. | UNS |
| 718 | 2.4668 | N07718 |
Common Types of Inconel Alloy 718 Sheet & Plate
Inconel 718 Hot Rolled Sheets
Alloy 718 Cold Rolled Plate
Inconel® Alloy 718
Coils
718 Inconel Sheets & Plates Technical Data Sheet
Inconel Alloy 718 Sheet Standard Size
718 Inconel Sheet Thickness
Alloy 718 Plate Weight Chart in Kg
Inconel Alloy 718 Sheet Sizes
718 Inconel Alloy Sheet Price List
| Price List of Inconel Alloy 718 Sheet | Alloy 718 Plate Price in India (INR) | 718 Inconel® Alloy Sheet Price in USD | Alloy 718 Plates Price in UAE (Dirham) |
| 718 Inconel Alloy Sheets Price | ₹ 400-₹ 600 | $ 9.11 USD | 30.43 AED |
| Alloy 718 Sheet Price Per Kg | ₹ 745-₹ 580 | $ 5.27 USD | 19.02 AED |
| 718 Inconel Alloy Plates Price | ₹ 158-₹ 600 | $ 6.42 USD | 7.88 AED |
| 16 Gauge Inconel Alloy 718 Sheet Price | ₹ 528-₹ 630 | $ 9.35 USD | 18.96 AED |
| 24 Gauge Inconel Alloy 718 Sheet Price | ₹ 755-₹ 928 | $ 3.87 USD | 40.92 AED |
| 6mm 718 Inconel Alloy Plate Price | ₹ 580-₹ 690 | $ 8.86 USD | 43.52 AED |
| 718 Alloy Sheet Price | ₹ 1310-₹ 1515 | $ 38.71 USD | 69.03 AED |
| Price of 1mm Inconel® Alloy 718 Sheet | ₹ 1175-₹ 1350 | $ 32.24 USD | 66.28 AED |
| 718 Inconel Alloy Coils Price | ₹ 500-₹ 950 | $ 7.49 USD | 40.18 AED |
| 718 Inconel Alloy Plate Price | ₹ 1450-₹ 1900 | $ 40.87 USD | 40.29 AED |
Check 718 Inconel Alloy Sheet Standard Size, Thickness, Weight and 718 Inconel Perforated Sheet Price per kg in Mumbai.
Inspection
Surface and Dimension Test, Mechanical Properties Test(tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Chemical Composition Inspection, No-destructive Test, Hydrostatic Test.
Finish Types
- No.4 Finish
- Mirror Finish
- Brushed Finish
- Polished Finishes
- No. 2B – Matte finish
Packing
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Marking
Our products are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases.
718 Inconel Alloy Sheet Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| 718 | 0.08 max | 0.35 max | 0.35 max | 0.015 max | 0.30 max | - | 50.00 - 55.00 | 17.00 - 21.00 |
718 Inconel Alloy Plate Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) |
| 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
Other Types of Inconel Alloy 718 Sheet & Plate
Inconel Alloy Sheet and Plate
- 718 Inconel Alloy Sheet Distributors
- Alloy 718 Sheet Manufacturer in Mumbai
- 718 Inconel Alloy Sheet
- UNS N07718 Sheets
- 2.4668 Plate
- 718 Plate
- 718 Inconel Alloy Plate
- Alloy 718 Plate Supplier in Mumbai
- 718 Inconel Alloy Sheets Cut To Size
- Alloy 718 Sheet Manufacturer in India
- Alloy 718 Plate
- 718 Nickel Alloy Plate 10mm
- Alloy 718 Cold Rolled Sheets
- Inconel 718 Sheet Suppliers in India
- Inconel 718 Sheet
- Ally 718 Plate Manufacturer in India
- 718 Inconel Alloy Sheet Weight Calculator
- 718 Inconel Alloy Cold Rolled Plate
- Inconel Alloy 718 Plates
- 718 Inconel Alloy Checker Plate Dealers
- 2mm 718 Inconel Alloy Sheet
- 2.4668 Sheets
- UNS N07718 Plates
- 718 Plate Suppliers
- ASTM B168 718 Inconel Alloy Plate
- Thin Inconel Alloy 718 Sheets Stockist
- Alloy 718 Plate Manufacturer in Mumbai
- 718 Inconel Alloy Sheet
- Inconel Alloy 718 HR Sheets
- Alloy 718 Sheet Supplier in Mumbai
- 718 Sheet
- Inconel® Alloy 718 Plate Suppliers in India
- ASME SB168 718 Inconel Alloy Sheets
- 10 Gauge Inconel Alloy 718 Sheet
Inconel Alloy Coils
- Alloy 718 Manufacturer in Mumbai
- 718 Inconel Alloy Coil
- T Shaped Inconel Alloy 718 Coils
- 2.4668 Coil
- 718 Inconel Alloy Coil Manufacturers in India
- Alloy 718 Coil Suppliers in Mumbai
- 718 Inconel Alloy Suppliers
- ASME SB 168 718 Inconel Coil
- Alloy 718 Coil Manufacturer in Mumbai
- 718 Inconel Alloy Coils
- 3mm Inconel Alloy 718 Coil
- 718 Inconel® Alloy Coil HS Code
- 2.4668 Coils
- Inconel Alloy 718 Coil Suppliers in India
- 718 Inconel Alloy Manufacturers In India
- 718 Alloy Coil
- Thin Inconel Alloy 718 Coils
- 718 Inconel Alloy Coil Manufacturers
- Inconel Alloy 718 HR Coil
- ASTM B168 718 Inconel Alloy Coils
- 718 Inconel Hot Rolled Steel Coil
- Alloy 718 Coil Manufacturer in India
- Inconel Alloy Flat Coil
- 718 Inconel Alloy Price
- Alloy 718 Coil Price Today
- Inconel 718 Suppliers in India
- Alloy 718 Coils Supplier in Mumbai
- 718 Inconel Alloy Slitting Coil
- 718 Nickel Alloy Coil Manufacturers
- Inconel Alloy Coil Suppliers
- 718 Alloy Weight Calculator
- UNS N07718 Coils
- Alloy 718 Cold Rolled Coil
- UNS N07718 Coils
718 Inconel Alloy Plate Manufacturing Process
Finishes Of 718 Inconel Alloy Plate
| Surface finish | Thickness (mm) | Width (max mm) |
| 2B – Cold rolled, heat treated, pickled, skin passed Sheet | 0.25–8.0 | 2032 |
| 2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
| Polished, brushed plate | 0.5–4.0 | 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2D – Cold rolled, heat treated, pickled Sheet | 0.4–6.35 | 1524 |
| Surface finish | Gauge (in) | Width (max in) |
| 2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
| 2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
| Polished Sheet (not brushed) | 11–24 | 60 |
Inconel 718 Coils Industrial Application
Oil & Gas
Industry
Power Plant
Generation
Marine
Industry
Petrochemical
Industry
Chemical
Industry
Aerospace
Industry
Sugar
Industry
Contact Renox Impex today for a best offer & competitive quotation Of 718 Thin Inconel Alloy Sheets.
Call : +91 80806 99454 / Email : [email protected]
India
Japan
Russia
United States
Saudi Arabia
Kuwait
Singapore
Malaysia
UAE
Germany
Italy
China
UK
Canada
Iran
Thailand
South Korea
Turkey
Morocco
Costa Rica
Kazakhstan
Philippines
Egypt
Vietnam
Oman
Australia
Qatar
Portugal
Colombia
Iraq
Tobago
Tobago
Myanmar
Jordan
Poland
Romania
Indonesia
Ukraine
Greece
Nigeria
Taiwan
Brazil
South Africa
Mexico
Bangladesh
France
Sri Lanka
Hong Kong
Cyprus
Angola
Venezuela
Spain
Czechia
Chile
Netherlands
Norway
ISO 9001 : 2015
Certified
Check Today's price of 718 Inconel Alloy Sheet in India
We also supply 718 Inconel Alloy Plate at the best price. You can check our latest 718 Inconel Alloy Sheet price list. Contact Renox Impex today for a best offer & competitive quotation Of 718 Alloy Coils.
Phone: +91 80806 99454
Email: [email protected]